Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Wharfedale Denton 1S: Two-minute review
Wharfedale has been having a lovely old time with its range of ‘Heritage’ loudspeakers lately — revisiting, remixing and reworking some of its Greatest Hits. The new Denton 1S, though, is slightly different. It’s an update of a 1974 design that went all-out to present as modern and forward-thinking. And so this reinterpretation has a ‘modern retro’ vibe rather than the ‘antique’ feel of other Wharfedale ‘Heritage’ models.
The curvy cabinet with its recessed front baffle, the mildly dramatic coaxial driver arrangement (which sees the tweeter positioned in throat of the mid/bass driver) and the handily compact dimensions are all attractive — and the option of a fairly deep blue as a finish doesn’t do any harm in this respect either. The numbers, both in terms of frequency response and of sensitivity, are encouraging too.
And when they’re doing their thing, it’s immediately apparent that the Wharfedale Denton 1S are no mere pastiche — they are a profoundly competitive pair of loudspeakers on their own terms and yes, it’s a good enough performance to make them some of the best stereo speakers on the market, right now.
Latest Videos FromTechRadar
The sound is, ultimately, slightly small-scale — but it’s organised, confident, entertaining, loaded with detail and has real unity and singularity to the way it’s presented. Yes, $999 / £649 spent elsewhere on a small pair of passive standmount speakers will buy you something different in sonic terms, certainly, but it’s very debatable indeed as to whether it can buy you anything better.
Wharfedale Denton 1S Review: Price and release date
- Launched May 31, 2026
- List price of $999 / £649 / AU$1,699
The Wharfedale Denton 1S speakers are available now, and in the United Kingdom a pair will set you back £649. In the United States this solution costs $999, while in Australia the going rate is AU$1,699 or thereabouts.
At this money, the just about cheaper Dali Sonik 1 might be their chief competition, at $900 / £449.99 / AU$849. And just to throw it out there, while many pricier options obviously exist, Cambridge Audio’s Award-winning active L/R S can be yours for a little less, at $549 / £399 / AU$949. Something to consider, anyway.
Wharfedale Denton 1S review: Features
- Coaxial tweeter / mid/bass driver
- ‘Brilliance’ switch
- Rear-facing bass reflex port
Passive loudspeakers have purity of purpose and are, unless someone’s being bloodyminded, relatively simple devices. Their list of features is seldom exhaustive. It’s a sign of just how straightforward passive loudspeakers tend to be that the Denton 1S stands apart simply because of a small rocker switch on the rear of each cabinet.
Unlike 1974’s original Denton 1, the Denton 1S features a truly coaxial driver arrangement. Here a 25mm soft-dome tweeter sits in the acoustic centre of a 165mm mid/bass driver made from polypropylene. Here, as with any coaxial driver, the idea is to offer superior time-alignment and driver integration.
With the forward-firing drivers bolstered by a rear-facing bass reflex port, Wharfedale is quoting a frequency response of 50Hz — 20kHz and sensitivity of 88dB — that second figure strongly suggests this speaker will be in no way tricky to drive. Of course, the orientation of the reflex port means that low frequency presence is likely to increase the closer to a rear surface the speaker is positioned — and that’s where the little rocker switches come in.
It’s described as a ‘brilliance’ control, and its two positions are labelled ‘norm’ and ‘max’. The idea is that setting the switch to ‘max’ will give a 1.5dB boost to the 2 – 4kHz area, which should allow the upper frequencies to hold their own against the emboldened low end in the event that the reflex port is delivering a little too much of a good thing. Of course, it will take the listener roughly no time at all to establish whether or not they think the ‘max’ setting is a good idea or not.
Wharfedale Denton 1S review: Sound quality
- Detailed, energetic and rhythmically coherent sound
- Great imaging and stereo focus
- Ultimately sound fractionally small-scale
Owners of loft apartments, aircraft hangars and the like, look away now. There’s a huge amount to enjoy about the way the Wharfedale Denton 1S perform, but when it comes to outright scale, the ability to fill an authentically large space with sound, there are better options around that cost a similar amount of money.
Everyone else, though, should read on.
No matter the source of music, no matter if it’s as straightforward as Looped by Kiasmos or as relatively complex as Re-make/Re-model by Roxy Music, the Denton 1S get an immediate handle on it. They’re a generously entertaining listen, vigorous in a nicely controlled manner, and carry enough detail along with them to make sure you’re as informed as you are stimulated.
That coaxial driver arrangement works a treat inasmuch as the imaging and stereo focus the speakers are capable of is completely convincing. There’s a unity and a togetherness about the way the Wharfedale present recordings that’s never less than enjoyable and periodically absorbing. In combination with their spirited and enthusiastic attitude, it makes for a genuine sense of performance — even if you’re listening to a recording that was never a performance in the first place. And while the soundstage isn’t the largest, it’s properly defined and rigorously organised.
The tonal balance is, fractionally, on the warmer side of neutral — but as long as the system that’s powering the speakers isn’t overtly toasty then it really shouldn’t be an issue. Frequency response, too, is just slightly titled. There’s a tiny suggestion of emphasis on the lowest frequencies, but again this is only likely to be a concern if the speakers are powered by a bass-centric set-up. Anyway, low-end control is confident and the Wharfedale express rhythms with real coherence as a result.
Midrange resolution is impressive too, and there’s real eloquence to the way the Denton 1S handle voices. Detail retrieval, which is impressive across the board, really comes to the fore here — the character and attitude imbued in a vocal performance, as well as information regarding timbre and technique, are made apparent. And at the top of the frequency range, the Wharfedale attack with determination — but there’s plenty of substance, as well as brilliance, to treble sounds, and never any suggestion of edginess or hardness.
The attention to detail extends as far as the dynamic of harmonic variation, and there’s a fair amount of capacity where the broader dynamics of volume or intensity are concerned. When the charge into the last chorus or the massed orchestral crescendo kicks in, the Denton 1S track it faithfully — and they do so without altering their sonic characteristics in the slightest.
And you don’t need a brute of an amplifier to enjoy all of these admirable attributes. The Wharfedale are in no way tricky to drive; even a modestly priced amplifier with unremarkable power numbers should have no problem getting the best from these speakers. And ‘the best’ is, on a pound-for-pound basis, at least on a par with the very best around.
- Sound quality score: 4.5 / 5
Wharfedale Denton 1S review: Design
- 330 x 236 x 229mm (HxWxD)
- Magnetically attached grilles
- Choice of three finishes
The coaxial driver means the Denton 1S should be just as happy (and effective) positioned on its side as it is standing upright. And the fact that Wharfedale has provided an integrated fitting for a wall bracket suggests the company thinks the speaker will perform successfully if it’s wall-mounted too. Cabinet depth of 229mm (which obviously increases with the pair of speaker cable binding posts at the rear) doesn’t automatically shout ‘wall-mount!’ to me, though, I have to admit.
Mind you, no matter where you position the Wharfedale they look good. The cabinet features the same curves and the same recessed front baffle as the original Denton 1 — in white, especially, there’s more than a hint of that late-60s / early-70s futurism that started years previously with the likes of Dieter Rams and Stanley Kubrick. Unlike the original model, though, which was made from moulded polyurethane that looked and felt super-modern but was a bit of a disaster in acoustic terms, the Denton 1S is made from bonded and braced fibreboard. Less modern, more effective.
That recessed front baffle allows the magnetically attached grilles to almost sit within the cabinet, and they’re flush with the top, bottom and side panels when they’re in position. Both the grille and the front baffle features a quite assertive stylised ‘W’ logo that lets you know you’re in the presence of a ‘Heritage’ Wharfedale design.
The compulsory options of black and white are joined by a third finish — the deep-ish blue of my review sample. Each of the available finishes looks good, no two ways about it, but the dimensions and the shape of the Denton 1S could quite easily lend themselves to quite a few other colours. It works for Dali and Cambridge, and I see no reason why Wharfedale shouldn’t produce the Denton 1S in some livelier finishes than are currently on offer.
Wharfedale Denton 1S review: Usability and setup
- Attach some speaker cable running from an amplifier
- Position the speakers to your satisfaction
- Experiment with grille and ‘brilliance’ switch
Just as with ‘features’, there’s really not too much to get your head around here. You’ll decide to position your speakers on dedicated stands, or on wall-brackets, or on a shelf… no matter where you want them, though, they’ll need to be connected to an amplifier via a couple of lengths of speaker cable.
After they’re positioned and running, you have just a couple of chances to have some input into the way they sound. The sonic difference between ‘grille on’ and ‘grille off’ is, quite honestly, less significant than the visual difference — but you will most definitely have a preference as to whether you prefer your ‘brilliance’ switch at ‘norm’ or ‘max’.
- Usability and setup score: 5 / 5
Wharfedale Denton 1S review: Value
It’s very hard indeed to argue against the notion that there’s great value for money on offer here. The Wharfedale Denton 1S are properly made, expertly finished, visually interesting (everything’s relative, after all), intriguing on a technological level and, most importantly of all, sound engaging and alert. Unless you crave absolutely as much sonic scale as this sort of money can buy, there’s an awful lot to enjoy and even admire here.
Should I buy the Wharfedale Denton 1S?
Buy it if…
Don’t buy it if…
Wharfedale Denton 1S : Also consider
How I tested the Wharfedale Denton 1S
With the Wharfedale Denton 1S on a pair of Blok Axis stands, I connect them to my reference system: Cambridge Edge W power amplifier, Eversolo DAC-Z10 pre-amplifier, Technics SL1300G turntable (with Goldring 1022 cartridge and preamplified by a Chord Huei), Arcam ST25 network streamer and Rega Apollo CD player — so I was able to listen to music from many storage formats and at a wide variety of resolutions. And then in an effort to up the ‘retro’ credentials just a little, I replaced the pre- and power amplifier with an A&R Cambridge A60 integrated amplifier from 1976.
Follow TechRadar on Google News and add us as a preferred source to get our expert news, reviews, and opinion in your feeds.
https://cdn.mos.cms.futurecdn.net/XKRAzXiuaB29rABfKzLk8f-2560-80.jpg
Source link
Simon Lucas
