Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
With plenty of office, ergonomic and gaming chairs on the market, FlexiSpot gives it a go with the oddly named BS12B-Pro, let see what makes it stand out from the rest of the crowd.
Having used this chair for over two weeks now after using an old 11-year-old Ikea Markus office chair here are my thoughts on the FlexiSpot’s take and how it compares to the best office chairs we’ve reviewed here at TechRadar Pro.
The chair arrived in a large plain cardboard box which was a bit beaten up by the courier, the outside informing you what it was, model and colour with the “FlexiSpot” branding and motto in blue, at least some color.
FlexiSpot BS12B-Pro: Assembly
Opening up the box, everything appeared to have been either haphazardly thrown in the box or the courier gave it a bit of a tumble around. Not much was securing anything in place like you would find on a monitor for example being in case in foam. It appears that FlexiSpot knew that this was the case as each component of the chair had its own plastic or cardboard wrap or foam added in places likely to be pointy.
Removing everything and laying it out flat allows you to see how it all goes together; I noted that the seat and backrest are made of a mesh like fabric to enhance breathability where it’s needed the most.
The wheels are notably plastic castor wheels which were freely spinning, both the wheel and spindle. They appeared sturdy enough for the chair but I do wonder about their longevity and how they fair on my laminate flooring.
Inspecting the part that will take nearly all the combined weight of the chair and the seat, which is the spider-like legs, I saw that they were made from plastic. Coming from an Ikea Markus Chair which for £100 less has a steel base that provides both better strength, material quality and feel as well as weighing the chair down so that it should be hard to tip over.
Putting it together was rather quick and easy. FlexiSpot provides some Allen keys and a small spanner to get the job done if you have absolutely no tools whatsoever, but with proper tools I had this chair up and assembled in about 15 to 20 minutes. One good thing I noticed was that the screws used to assemble the chair all had a blue coloured thread glue already applied to prevent the screws from backing out, a nice touch.
The one-part I found a bit fiddly to put together was the head rest, this was a bit difficult as the space for your fingers is very narrow
Image 1 of 2
FlexiSpot BS12B-Pro: In use
The main seat of the chair is almost a 50 x 50cm square (51 cm wide by 49cm back to front) pad contoured at the corners and edges with a front curve for under thigh comfort. The seats minimum height is 46cm and at max is about 54cm. The seat can be moved forwards and back about 4cm of movement depending on how much or little under thigh support you want or need to have. Lastly the seat can be tilted from a flat 90 degrees to a backwards 135-degrees, there is no forward tilt which is a miss as some people do prefer seating slightly forwards.
Image 1 of 2
Adjustments are all done by the use of three buttons or mini levers on the front right-side of the chair. Made of metal for the premium feel, they are a nice touch, rather than having to reach under the chair for a lever to make adjustments. Furthermore, I feel like they can be used blindly, no need for me to look at them. Nonetheless the symbols are quite self-explanatory from left to right, back and forth seat, tilt lock and seat height up and down. Tucked underneath is the tension adjustment but this is something seldom adjusted.
The seat itself is covered in a mesh like fabric to allow breathability and prevent a sweaty backside, it is stretched tight over the frame of the seat to give it that “bounce” but it does mean that the edges of the seat are sharp corners on the sides and back, the front however does a have a small foam insert for under thigh support. Long term use will see if this fabric can hold up to daily use.
I expected more of the lumbar support; the fabric of the chair is so tight that fully leaning back I don’t even touch the lumbar support most of the time. It is also limited to 3 different heights and 0 front to back options.
The armrests appear to be the standard shaped, plastic structure with firm foam tops, they can be adjusted using the lever under the arm rest from 16cm high (from top of seat to top of arm rest) to 23.5cm high. They can be rotated 1 click in and out from the straight and about 9cm of forwards and backwards movement, the rotation, forwards and backwards movement cannot be locked into place so bumping into the chair may move the arm rests.
Image 1 of 3
The headrest is where I was a bit disappointed by this chair a bit when comparing it to an Ikea Markus chair. The Markus headrest height was comfortable for me (at 6’1”) so that my head rested on a cushioned part at the top of the chair. The BS12B-Pro doesn’t have this, instead it feels like the headrest, at its maximum height setting, is jamming into my neck or shoulders giving my actual head no support. Any lower setting and it’s now jamming into my shoulder blades. I suppose this chair would work well if you were 5’8” or 5’10” tall.
FlexiSpot BS12B-Pro: Final verdict
In the end the headrest being so low forces me to sit in a slouched position (i.e. not ergonomic), or if I sit in a proper position, my head has nowhere to rest. Right now, sitting bolt upright in the chair gives my lower and upper back support, but the headrest is below my lower neck. The headrest has no other tilt or rotation adjustments that can be made.
As for the price, at the time of writing this review the FlexiSpot BS12B-Pro is shown available for £399.99 but seems to be suspiciously on sale permanently for £249.99 which leads me to believe that this is the actual cost of the chair, £249.99 is the actual cost. Also I noted that save for the box and manual, nowhere on the chair is any FlexiSpot branding.
For more workspace essentials, we tested the best standing desks for the home and office.
https://cdn.mos.cms.futurecdn.net/UaQR3caKnsYZNVjKKPpW4J-1200-80.png
Source link
desire.athow@futurenet.com (Desire Athow)
