Genki Attack Vector review: a cover and grip combo that’s comfortable and secure

Genki Attack Vector: Review

The Attack Vector is a basic set of covers and grips for your Switch 2 and Joy-Cons, designed to protect your console and improve ergonomics in handheld mode.

The plastic covers for the console and both Joy-Cons are quite plain, with a totally black finish and no extra flourishes. They’re reasonably thick and durable, but also light.

The back cover for the console is easy enough to snap on. It should offer sufficient protection from scratches and the like, and I appreciated the fact that the inside has a small patch of rubber, which makes the fit more snug.

Latest Videos From

Like the best Nintendo Switch 2 accessories, the Attack Vector doesn’t interfere with the console’s stand, ports or buttons, thanks to the various cutaways. They’re still quite easy to use, although the deep recess that’s created around the power and volume buttons means you may have to press these more with your fingernail than your fingertip. What’s more, the Switch 2 still fits in the dock with the cover attached; in fact, the fit is actually better, since it prevents it from wobbling at all.

Snapping on the Joy-Con covers is a little trickier, but it’s easier if you hold the detach button on each Joy-Con as you slide them on. These also have a small rubber backing on the inside for a more secure fit.

The Attack Vector comes with three sets of grips to attach to the back of these covers, of varying shapes and sizes. These have a solid build quality and a nice finish, with a rubber texture that feels comfortable, grippy, and hardwearing.

Attaching these grips is a little difficult at first. You have to line up the grooves and slide them on blindly, which can result in numerous failed attempts. However, I soon got the technique down and managed to attach them without issue thereafter. Once attached, they’re very stable; at no point did they come loose while I used them.

The two larger grip sets are called the Anchor and Balance. I found the latter set very comfortable, as the sides of the grips fitted the center of my palms naturally as I played.

The Anchor grips are shorter and feature ergonomic indentations at the bottom. I didn’t find these as comfortable or as secure, since only my last two fingers fit in these indentations. I suspect they’re designed for smaller hands than mine. Ultimately, though, both grips make handheld mode more comfortable and secure, especially when holding the Switch 2 upright, as you have something more substantial to hold on to.

There is a problem with these grips, though. Their weight and leverage mean that the Joy-Cons can rock back and forth slightly in the console, which is a little disconcerting. This rocking is minimal under normal use, and it never resulted in the Joy-Cons disconnecting from my Switch 2 during testing, but I do worry that eventually their hold in the console might loosen.

No such issue is created by the Feather grips, though. These are the smallest set and only cover the middle section of each Joy-Con. Unlike the other grips, they barely protrude outwards, offering a much more subtle feel. But given the stock Joy-Cons’ absence of a grippy surface or an ergonomic shape, I was still pleased with the limited support they provided. What’s more, I found them ideal when the Joy-Cons were detached from the console, since, unlike the other sets, they offer enough bulk to get a secure grip without impeding the reach of my thumbs to the controls.

At £40, the Attack Vector isn’t exactly cheap. However, the covers provide a good fit and basic protection for your console and Joy-Cons. Meanwhile, the comfortable grips for all types of hands are great if you play in handheld mode often, especially in a more upright position.