The switch uses its chassis as a heatsink and its fan-less design means it’s completely silent. Management options are good: you can run it in standalone mode or hook it up with Zyxel’s Nebula Control Center (NCC) service for full cloud access.
The switch packs plenty of LEDs into its front panel, with lights showing system and cloud connection status, while a three-color PoE LED warns if you’re getting close to the power budget. Each port is also assigned an LED that shows whether its connection speed is 100Mbits/sec, gigabit or 2.5GbE.
The switch is easy to deploy in standalone mode, with its local web console presenting four wizards for setting a default admin password and SNMP community names, and configuring security features, VLANs and quality of service (QoS). Not that it will concern the target audience, but the XMG1915-10MP is a pure Layer 2 switch and doesn’t offer the “Lite-L3” static routing features found in Zyxel’s larger PoE switches.
Standard L2 features are plentiful and include port and protocol-based VLANs plus static and LACP link aggregation groups. VoIP networks are on its radar as the switch identifies traffic from IP phones using a customizable organizationally unique identifier (OUI) list and automatically prioritizes it by dynamically creating voice VLANs.
The web console’s dashboard shows details on system utilization, port speeds, whether they’re supplying power and overall power consumption for all connected powered devices (PDs). One of three power priorities can be assigned to each port so if the power draw gets close to the maximum available, those with the lowest priority will be switched off first.
Unless you’re planning on deploying power-hungry PoE IP cameras with integral PTZ functions, it’s unlikely you’ll get close to the maximum power budget. We tested this by connecting two Zyxel Wi-Fi 6E access points (APs) and the new WBE660S Wi-Fi 7 model plus Netgear ’s tri-band WAX630E AP; we saw from the web console that the total draw didn’t go above 43W, leaving us with 87W still to play with.
Cloud deployment is swift. We used the Nebula iOS app on an iPad to scan the QR code label on the switch’s base. Two minutes later the switch popped up in our cloud portal and received all our site settings, including a new admin password.
The switch can be managed in standalone mode or remotely from Zyxel’s NCC cloud portal (Image credit: Future)
The widget-based NCC dashboard can be easily customised and we added widgets to show the online status of our switch and total power usage. Selecting the switch took us to its monitoring page, with color-coded views of all ports and 24-hour traffic and power graphs, which can be extended to seven days with an optional NCC Plus license and to one year with the Pro version.
For general switch operations, Nebula provides remote access to all the same features as standalone mode. Up to five global PoE schedules can be assigned to specific ports that determine when attached PDs are active and you can disable and enable PoE services on each one as well – very handy for remotely rebooting a PD that isn’t responding.
The compact XMG1915-10EP is a great choice for small businesses that want plenty of multi-gigabit ports and high-power PoE++ services. It supports standalone and cloud management and the remarkably low price includes an impressive set of features.
We also ranked the best apps for small businesses.
