Why you can trust TechRadar
We spend hours testing every product or service we review, so you can be sure you’re buying the best. Find out more about how we test.
Shark SilkiPro Straight review: two-minute review
The Shark SilkiPro Straight is a wet-to-dry hair straightener that combines a dryer fan, ceramic plates and three interchangeable combs in a single product. It launched in February 2026 and costs £249.99 in the UK and $249.99 in the US.
It isn’t the most intuitive styler. The grip takes some getting used to, and the location of the combs requires some deliberate – at times awkward – positioning. Working in small sections is non-negotiable if you want a consistent finish or you don’t want to trap your hair and pull it out with each pass.
If you can get past this, though, the results are great. The SilkiPro consistently made my fine, mid-length, naturally curly hair look shiny and frizz-free when used in Wet mode. This mode is designed to dry and straighten your hair straight from the shower.
It’s not the fastest entrant in our best hair dryer list, taking as long as 8.5 minutes for a standard styling session. As a result, it’s unlikely to save you a lot of time compared to drying and straightening separately, but it is more convenient. Dry mode works well enough as a finishing step, but it’s technically a glorified ceramic straightener, and a large, awkward, and clunky one at that.
The three interchangeable combs are where the SilkiPro really earns its crust, especially if you have curly or coily hair. The wide-tooth comb rough-dries and detangles from the roots on very wet hair; the gentle comb gives a softer, more natural straight; the precision comb delivers a sleek, flat finish. No competitor offers anything like this, and it feels like a feature designed with natural hair in mind, rather than an afterthought.
Elsewhere, the Shark SilkiPro’s motion-sensing auto-pause, which cuts airflow after three seconds when you stop moving, is useful in theory but annoying in practice. It interrupts the rhythm, and the constant shift in noise levels as the airflow speeds up, slows down, and stops gets old quickly. At 70dB on high, it’s obviously louder than a non-airflow straightener but quieter than a full-power hairdryer.
For fine or straight hair, there are simpler, cheaper tools that will do the same job as the Shark SilkiPro. However, for curly or coily hair where wet-to-dry styling genuinely changes the routine, it’s a well-priced, well-equipped choice.
Shark SilkiPro: price & availability
- Price: £249.99 (UK) / $249.99 (US)
- Launch date: February 2026
- Availability: UK / US
At £249.99 in the UK and $249.99 in the US, the SilkiPro Straight is the most affordable entry in the growing wet-to-dry straightener market, by quite some margin.
It’s sold directly from Shark as well as third-party retailers, including Amazon and Boots. It’s currently available in two colors, called Plum Satin and Rose Petal in the UK, and Rose and Plum in the US. A Turquoise Wave model is also in the works.
Both the UK and US versions ship with the styler plus three attachments: a wide-tooth comb, gentle comb, and precision comb. The UK model also has a heat-resistant storage pouch in the box, but the US version doesn’t.
At this price, the SilkiPro Straight is almost half the price of the Dyson Airstrait at £449.99 / $499.99, and more than £100 cheaper than the £379 / $429 GHD Duet Style, which are the most like-for-like 2-in-1 stylers to the Shark SilkiPro. All three take hair from wet to dry, but they go about it slightly differently.
The GHD Duet Style uses heated plates with airflow to deliver the glossiest finish of the three. The Dyson Airstrait has no plates and instead sends high-pressure air through narrow gaps to straighten the hair for a softer, more natural result.
The Shark uses the same plates-plus-airflow approach as GHD but undercuts both it and the Dyson on price. And it’s the only one to include interchangeable combs.
The SilkiPro Straight does enough to justify its price, particularly for anyone with curly or coily hair who’d genuinely use the wet-to-dry features every day. If you already have fine or straight hair, you may not see the full value of all of its features – and a cheaper dryer and/or straightener will suffice – but you will appreciate the all-in-one design for a lower price than its rivals.
Shark SilkiPro: specs
|
Model: |
Shark SilkiPro Straight |
|---|---|
|
Wattage: |
1,000W |
|
Weight (without cord, approx): |
1.72lbs / 780g |
|
Size (H x W x L, approx): |
12.05 x 2.19 x 1.54in / 30.61 x 5.56 x 3.91cm |
|
Airflow settings: |
3 |
|
Temperature settings: |
3 |
|
Extra modes: |
Wet mode plate (212-248 F / 100-120C); Dry mode plate (320-428F / 160-220C); |
|
Noise level |
70dB average |
|
Attachments: |
Wide-Tooth Comb, Gentle Comb, Precision Comb, Pouch (UK only) |
|
Cord length: |
8ft / 2.4m |
Shark SilkiPro review: design
- Larger and heavier than a regular flat iron
- Three interchangeable combs for different hair types
- Split controls for airflow and temperature
There’s very little that’s subtle about the Shark SilkiPro Straight, from the color to its shape and features.
The top of the body looks like a conventional flat iron with ceramic plates controlled by a hinge, but the chassis is noticeably wider to accommodate both the comb track that runs along the side and the air vents that direct airflow down through the plates.
The main part of the handle sits just below the hinge and just above a vented grille, and the control buttons are stacked along the side of the lower body into two rows.
Along the top row is where you select the SilkiPro’s three airflow settings, cycling through them in order. Below this is the button to cycle through the three heat settings, and the wet/dry mode toggle sits at the bottom alongside the gold power button. On the opposite side of the arm is a lock switch that keeps the plate closed when being stored.
The specific temperatures of the plate’s heat settings depend on whether you’re in Wet or Dry mode.
- Wet mode: 212-248F / 100-120C
- Dry mode: 320-428F / 160-220C
In Wet mode, which is designed for use on hair that’s at least 70% dry after rough-drying from the roots, the plates run between 212F / 100C and 248F / 120C.
Dry mode, which is used for finishing and touch-ups on already-dry hair, runs the plates much hotter – between 320F / 160C and 428F / 220C – and works like a conventional ceramic straightener.
|
Temperature |
Wet Mode |
Dry Mode |
|
High |
120C / 248F |
220C / 428F |
|
Medium |
110C / 230F |
190C / 374F |
|
Low |
100C / 212F |
160C / 320F |
I reviewed the Plum Satin model, which has a two-tone purple/lilac matte body with gold cool-touch strip, gold-toned ceramic plates, and a matching cord. It’s a fun, if slightly cheap-looking, mix that stands out in a sea of traditionally white-and-black stylers, but won’t suit everyone.
On first glance, I assumed the two-tone design was purely aesthetic, but it acts as a reference point when styling your hair to show which direction the air is flowing.
The three combs – wide-tooth, gentle, and precision – clip into a track that runs along the back of the tool, locking in with an audible click. When attached, they sit flush to the styler, which not only keeps them close to the plates but doesn’t add more to the chunkiness of the overall design. As they only sit on one side of the styler, you need to be very deliberate about how you hold and use the SilkiPro. This can take a lot of getting used to.
Swapping between the combs is easy, although Shark stressed you shouldn’t change combs immediately after using Dry mode, as the hot plates may burn your hands.
In terms of weight, at 1.72lbs / 780g, the SilkiPro is heavier than a standard flat iron, and you can feel it, particularly during longer styling sessions.
The swivel cord helps reduce wrist strain, and the cool-touch gold strip gives you a reliable place to grip, but with such a small handle and a top-heavy design, it’s not the most comfortable styler to maneuver.
- Design score: 3.5 out of 5
Shark SilkiPro review: performance
- Delivers smooth, frizz-free results quickly
- Auto-pause airflow can be annoying
- Dry mode doesn’t offer more than a conventional flat iron
Although it looks simple enough, the SilkiPro Straight isn’t the most intuitive styler to use.
Its larger size and the specific location of the combs and airflow mean the grip and positioning don’t come naturally. You also have to work in small sections to make sure you not only get a consistent finish, but also don’t trap hair outside of the plates. Once you’ve mastered all that, it’s a great styler, if a little slow and awkward at times.
In Wet mode, the mix of airflow and plates does a good job of drying and straightening at the same time, with impressive results on my naturally curly hair. Even without a comb attached. It gave me shiny, sleek and frizz-free hair every time, but having to meticulously move around your head in small sections means it’s not a quick job.
During my tests, it took as much as 8.5 minutes to dry my entire head of fine, mid-length hair on the fastest airflow and heat setting. For comparison, most dryers I’ve tested average around five minutes.
The wide-tooth comb is the best place to start on very wet hair, rough-drying the roots while stretching and detangling before you begin straightening. Switching to the gentle or precision comb for the straightening pass creates a clean finish.
In addition to angling the airflow so it blasts up at the roots, and thus adds volume, you can also use the SilkiPro like a standard dryer. Without any hair inside, close the plates to activate the air, and angle the flow at your roots or anywhere you want to quickly blast away water.
Dry mode works well as a finishing step for smoothing flyaways, but at that point, it’s effectively just a regular straightener – albeit a larger, less comfortable one.
A built-in HeatSense sensor reads the plate temperature 1,000 times per second and automatically adjusts the heat based on how much moisture remains in the hair, applying less heat when it’s wetter and more as it dries.
Shark goes quite hard on the benefit of its motion-sensing auto-pause feature, which cuts airflow after three seconds when you stop moving it. In theory, this sounds great. In practice, it’s annoying. Pausing to clip away a finished section is enough to trigger the auto-pause, and the interrupted rhythm gets old quickly. Not to mention the constant change in noise levels between the motor sound when the plates are open, the airflow noise when the plates are closed, and the constant on and off of the auto-pause.
Speaking of which, noise is reasonable for a tool with a built-in fan. It’s obviously louder than a straightener that doesn’t have an airflow option – averaging at 70dB – but it’s quieter than most hairdryers, even at full power.
- Performance score: 4 out of 5
How I tested the Shark SilkiPro review
I tested the Shark SilkiPro Straight over four weeks, using it as my go-to styling tool on both wash days and when I wanted to style second-day hair.
I tried all three combs across a range of scenarios, starting with the wide-tooth comb on freshly washed hair to rough-dry and detangle from the roots; moving to the gentle comb for straightening, and finishing with the precision comb on dry mode to lock in the style.
I tested the 2-in-1 styler on damp hair at varying levels of dryness to get a sense of how the heat-sensing plates worked, and paid particular attention to how the results compared to my usual two-step routine of hairdryer followed by straighteners. I also tested it on dry hair in ry mode alone, using it as I would a standalone flat iron.
Throughout, I noted how easy it was to use, noise levels using the DecibelX app, and the finish and hold.
Read more about how we test
- First reviewed April 2026
https://cdn.mos.cms.futurecdn.net/mcwwixFewyoXcnjAbH8P5H-2560-80.jpg
Source link
